Switching from linear to cyclic δ‐Polyvalerolactone synthesized via zeolitic imidazolate framework as a catalyst: A promising approach

A series of spray dried zeolitic imidazolate frameworks (ZIFs = ZIF‐8, ZIF‐67, and Zn/Co‐ZIF) are used as a catalyst for the bulk ring‐opening polymerization of δ‐valerolactone without any co‐catalyst to generate polyvalerolactone. Interestingly, using the same catalyst under the same reaction conditions could manipulate the structure of the product polymer, and thus its physical properties. Thus, using a dried substrate leads to the formation of the cyclic polymer while a linear polymer was formed on using the commercially available substrate. An activated monomer mechanism has been suggested where the propagating zinc alkoxide undergoes an intramolecular transesterification to release cyclic or linear polyvalerolactone. The ROP of δ‐VL without drying shows that the polymeric zwitterions have little tendency to cyclize in the presence of moisture. At 140 °C, ZIF‐8 shows a superior catalytic activity resulting in the production of cyclic polyvalerolactone having a high molecular weight as compared to ZIF‐67 or Zn/Co‐ZIF due to the presence of highly active sites. The catalyst could be recycled and reused without any significant loss of catalytic activity.     

Finely dispersed palladium on silk‐fibroin as an efficient and ligand‐free catalyst for Heck cross‐coupling reaction

A palladium–fibroin complex (Pd/Fib.) was prepared by the addition of sonicated fibroin fiber in water to palladium acetate solution. Pd (OAc)₂ was absorbed by fibroin and reduced with NaBH₄ at room temperature to the Pd(0) nanoparticles. Powder‐X‐ray diffraction, scanning electron microscopy–energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, CHN elemental analysis and inductively coupled plasma‐atomic emission spectroscopy were carried out to characterize the Pd/Fib. catalyst. Catalytic activity of this finely dispersed palladium was examined in the Heck coupling reaction. The catalytic coupling of aryl halides (‐Cl, ‐Br, ‐I) and olefins led to the formation of the corresponding coupled products in moderate to high yields under air atmosphere. A variety of substrates, including electron‐rich and electron‐poor aryl halides, were converted smoothly to the targeted products in simple procedure. Heterogeneous supported Pd catalyst can be recycled and reused several times.     

Graphene oxide: a surfactant or particle?

Graphene oxide is a two-dimensional carbon nanomaterial that has risen to prominence over the last decade as graphenes water-dispersible counterpart. This key feature offers tremendous potential in the formation of waterborne hybrid materials, coatings, membranes and adsorbents that make use of its diverse surface chemistry and extraordinary surface area. However, the fundamental colloidal properties of graphene oxide remain incompletely understood, with conflicting reports on how the material's amphiphilic nature and adsorption at interfaces render it surfactant-like or particle-like in nature. In the present work, recent developments in understanding the bulk and interfacial colloidal properties of graphene oxide are explored in the context of its chemistry and system thermodynamics, giving insight into the fundamental question of whether its aqueous behaviour is most accurately described as particle-like, surfactant-like or indeed something entirely different.     

Synthesis of μ2-Oxo-Bridged Iron(III) Tetraphenylporphyrin–Spacer–Nitroxide Dimers and their Structural and Dynamics Characterization by using EPR and MD Simulations

Iron(III) porphyrins have the propensity to form μ₂-oxo-dimers, the structures of which resemble two wheels on an axle. Whereas their crystal structure is known, their solution structure and internal dynamics is not. In the present work, the structure and dynamics of such dimers were studied by means of electron paramagnetic resonance (EPR) spectroscopy and quantum chemistry based molecular dynamics (MD) simulations by using the semiempirical tight-binding method (GFN-xTB). To enable EPR investigation of the dimers, a nitroxide was attached to each of the tetraphenylporphyrin cores through a linear and a bent linker. The inter-nitroxide distance distributions within the dimers were determined by continuous-wave (cw)-EPR and pulsed electron–electron double resonance (PELDOR or DEER) experiments and, with the help of MD, interpreted in terms of the rotation of the porphyrin planes with respect to each other around the Fe–O–Fe axis. It was found that such rotation is restricted to the four registers defined by the phenyl substituents. Within the registers, the rotation angle swings between 30° and 60° in the proximal and between 125° and 145° in the distal register. With EPR, all four angles were found to be equally populated, whereas the 30° and 145° angles are strongly favored to the expense of the 60° and 125° angles in the MD simulation. In either case, the internal dynamics of these dimers thus resemble the motion of a step motor.     

Thermal Activation of CH4 and H2 as Mediated by the Ruthenium Oxide Cluster Ions [RuOx]+ (x=1–3): On the Influence of Oxidation States

Thermal gas-phase reactions of the ruthenium-oxide clusters [RuO_x]⁺ (x=1–3) with methane and dihydrogen have been explored by using FT-ICR mass spectrometry complemented by high-level quantum chemical calculations. For methane activation, as compared to the previously studied [RuO]⁺/CH₄ couple, the higher oxidized Ru systems give rise to completely different product distributions. [RuO₂]⁺ brings about the generations of [Ru,O,C,H₂]⁺/H₂O, [Ru,O,C]⁺/H₂/H₂O, and [Ru,O,H₂]⁺/CH₂O, whereas [RuO₃]⁺ exhibits a higher selectivity and efficiency in producing formaldehyde and syngas (CO+H₂). Regarding the reactions with H₂, as compared to CH₄, both [RuO]⁺ and [RuO₂]⁺ react similarly inefficiently with oxygen-atom transfer being the main reaction channel; in contrast, [RuO₃]⁺ is inert toward dihydrogen. Theoretical analysis reveals that the reduction of the metal center drives the overall oxidation of methane, whereas the back-bonding orbital interactions between the cluster ions and dihydrogen control the H−H bond activation. Furthermore, the reactivity patterns of [RuO_x]⁺ (x=1–3) with CH₄ and H₂ have been compared with the previously reported results of Group 8 analogues [OsO_x]⁺/CH₄/H₂ (x=1–3) and the [FeO]⁺/H₂ system. The electronic origins for their distinctly different reaction behaviors have been addressed.     

New strategy for reversal tolerant anode for automotive polymer electrolyte fuel cell

New approach for the reversal tolerant anode for polymer electrolyte membrane fuel cell is suggested by using the multifunctional IrRu alloy catalyst having concurrent superior activities towards hydrogen oxidation reaction and oxygen evolution reaction to mitigate the degradation of anode under the fuel starvation condition.     

甲烷-二氧化碳重整制合成气与现代分析技术应用于探究性化工专业实验的设计与探索

以甲烷-二氧化碳重整制合成气为实例，设计探究性实验，将合成气的制备和现代分析技术应用于化工专业实验的教学实践中以提高学生的创新和实践能力。实验包括催化剂的制备，催化剂的性能评价和催化剂的表征等3大部分。采用工业最常用的浸渍法制备含有不同助剂的Ni/X/γ-Al2O3（X为Co，Fe，MgO，CeO2）催化剂，以甲烷-二氧化碳重整反应评价其催化性能，并采用XRD、H2-TPR、BET和TG对催化剂的微观结构进行表征。结合催化剂的性能评价结果和表征结果，探讨不同助剂对镍基催化剂性能的改善效果及机制。通过开设该实验，可以让学生了解化工学科的前沿知识以及现代分析技术的基本原理和用途，掌握专业的实验操作、数据处理和谱图绘制方法，提高学生的专业素养和综合能力。     

Synergistic Activities in the Ullmann Coupling of Chloroarenes at Ambient Temperature by Pd‐Supported Calcined Ferrocenated La2O3

Novel palladium‐doped nanoparticles have been explored to serve as the first metal oxide‐derived heterogeneous catalyst for Ullmann reaction of chloroarenes under mild condition (34 °C). This heterogeneous catalyst exhibited high catalytic activity towards the Ullmann homocoupling of chloroarenes into a series of useful symmetrically biaryl products with good to excellent yields in the presence of ethanol and NaOH, thereby leading to green and economical Ullmann reaction. The produced nanoparticles were successfully characterized by various techniques including PXRD, XPS, HRTEM, SEM‐EDS, BET, TGA techniques, elemental mapping analysis and ICP‐OES. Interestingly, based on characterization and experimental data, a reasonable mechanism has been proposed. Also, the formation of aryl methyl ketone as a by‐product has been further confirmed by isotopic labelling experiments that the acetyl moiety is derived from ethanol. Moreover, the catalyst was stable and could be easily reused up to 5 times under atmospheric air without suffering significant loss in catalytic activity.     

Self‐emulsion polymerization of amphiphilic monomers—a green route to synthesis of polymeric nanoscaffolds

Self‐emulsion polymerization (SEP), a green route developed by us for the polymerization of amphiphilic monomers, does not require any emulsifier or an organic solvent except that the water‐soluble initiators such as 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane]dihydrochloride (VA‐044) and potassium persulfate (KPS) are only used. We report here the polymer nanoscaffolds from a number of amphiphilic monomers, which can be used for in situ encapsulation of a variety of nanoparticles. As a demonstration of the efficacy of these nanoscaffolds, the synthesis of a biocompatible hybrid nanoparticle (nanohybrid), prepared by encapsulating Fe₃O₄ magnetic nanoparticle (Fe₃O₄ MNPs) in poly(2‐hydroxyethyl methacrylate) in water, for MRI application is presented. The nanohybrid prepared following the SEP in the form of an emulsion does not involve the use of any stabilizing agent, crosslinker, polymeric emulsifier, or surfactant. This water‐soluble, spherical, and stable nanohybrid containing Fe₃O₄ MNPs of average size 10 ± 2 nm has a zeta potential value of ?41.89 mV under physiological conditions. Magnetic measurement confirmed that the nanohybrid shows typical magnetic behavior having a saturation magnetization (Ms) value of 32.3 emu/g and a transverse relaxivity (r2) value of 29.97 mM^?1 s^?1, which signifies that it can be used as a T2 contrast agent in MRI. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

A Potential Alternative to Polystyrene: Ring-opening Terpolymerization of Different Epoxides with Phthalic Anhydride Using Metal-free Dual Catalysts

A series of semi-aromatic polyesters named as Poly(PO-CHO-PA) were facilely synthesized via ring-opening terpolymerization of biobased cyclohexane oxide(CHO)/propylene oxide(PO)/phthalic anhydride(PA) using economical U1/PPNCl as dual catalyst. The proportion of CHO-PA and PO-PA segments in polymer can be readily altered by changing the feed ratio of CHO/PO because the reactivity ratios of CHO and PO with PA calculated by Fineman-Ross method are comparable. All synthesized amorphous polyesters with various compositions show one Tg ranging from 62 ℃ to 133 ℃. Significantly, the mechanical, thermal and barrier properties of these amorphous semi-aromatic polyesters are also adjustable and investigated for the first time. The results indicate the semi-polyesters exhibit superior thermostability(T5% ranging from 306 ℃ to323 ℃) and high tensile strength(40.21-55.7 MPa) that is comparable with polystyrene(PS). Furthermore, Poly(PO-CHO-PA) films possess a promising prospect as packaging materials because of its colorless and highly transparent nature, along with low oxygen and water vapor transmission rate. All above performances may guarantee its potential alternative to commercial PS.